Email: weishuna@ms42.hinet.net | Phone : 02-26802702~3 | LINE : @ws26802702
繁體中文 | English

Menu

VACUUM FORMING FAQ

You are here: Home » Vacuum forming processing FAQ » Introduction to raw materials used in thermoformed packaging

Vacuum forming FAQ

Introduction to raw materials used in thermoformed packaging

  • Q PET

    A 1.PET1-2.PET
    It has heat resistance (60 ~ 85 ℃), water and oil resistance, light texture and high toughness. It does not contain toxic substances after heating, so it is widely used in food and industrial fields. Often used in Pote bottles, industrial packaging, TRAY disks, etc.

  • Q PET antistatic

    A
    2.PET anti-static
    Surface resistance is 109Ω~1012Ω, semi-permanent
    The addition of an antistatic coating on the surface reduces the resistivity and avoids the accumulation of static electricity caused by temperature difference and friction.

  • Q PS conductivity

    A

    The PS conductive material is black in color due to the addition of carbon black powder, and its impedance value is 103Ω~105Ω, for permanent
    Carbon black is used to achieve gas explosions that may be caused by static electricity, damage to precision instruments, dust coverage of factory conveyor belts, IC chip defect rate and damage during assembly and transportation. It is suitable for IC manufacturing, electronic parts, D-RAM, precision instruments, and protection and packaging of dust-proof objects.

  • Q PVC

    A
    4.PVC4-2.PVC
    It has heat resistance (60 ~ 80 ℃), corrosion resistance, and chemical resistance. Although diaoxine will be produced after high temperature combustion, the temperature is 250 ~ 450 ℃.
    Therefore, there is no need to worry about daily use. PVC uses a wide range of uses such as: pads, industrial outer packaging, and high-transparent hard products.

  • Q PS

    A 5.PS5-2.PS
    It has heat resistance (70 ~ 90 ℃), good transparency and easy processing, and is widely used in various types of packaging, general daily necessities, electronic products and other fields.

  • Q PP

    A 6.PP6-2.PP
    It has heat resistance (100~140℃ Celsius). Because of its characteristics such as lightweight, high strength, strong chemical resistance and easy processing, PP is widely used in various industrial and food fields.

  • Q High-cycle raw materials

    A 7. High-cycle wave raw materials7-1. High-cycle wave raw materials
    Use mostly on PET, and use high-circuit wave technology to stick paper cards and bubble shells to a stronger degree
Home

Home About Us Product FAQ Contact Us

2025 WELL CHSIEN PLASTIC CO., LTD. All rights reserved